Vacuum Feedthroughs, Heating Elements, and Custom Process Heaters for Aerospace, University Research, Semiconductor, Medical and OEM Applications

Molybdenum-Copper Stage Heater

Molybdenum Copper Stage Heater


The Molybdenum Copper Stage Heater is designed to heat a 1mm x 1mm x 0.5mm thick component to a maximum exposure of 200°C continuous, with very precise temperature uniformity for sampling purposes.

A highly effective assembly reaching temperatures of 200°C in under one minute utilizing only 2.6 watts. Because of the low mass and high conductivity of the moly copper base, reaching the target temperature and cooling down is highly efficient.


  • Temperature <201°C
  • Internal element must be able to withstand temperature <210°C
  • A cold section was not needed
  • Copper - Molybdenum (Copper-Moly) base
  • 12Volt, 3Watt (Max)
  • Two thermocouple type “K” external
  • M1 threads 

There are two thermocouples used to verify the test temperature. One TC is an exposed bare-bead TC 36 AWG, the second TC being a 0.062ӯ probe style unit. The M1 threads are included.

Molybdenum Copper Stage Heater


BCE Engineering & Quality Assurance

BCE engineers provide decades of experience in design and development, delivering a wealth of empirical data and experience. BCE welcomes your custom requirement and will design and deliver a part that meets your challenging needs.

BCE is recognized for its commitment to quality and excellence by being certified in accordance with ISO 9001:2015.
ISO 9001

Our engineers will help you find what you're looking for and respond the same day.
7:00 AM - 2:00 PM PST

* Required Field
21060 Corsair Blvd. Hayward, CA 94545 | (510) 274-1990
BCE Privacy Policy
© Copyright Belilove Company - Engineers. All Rights Reserved. Site by CMS4i.